TH3D EZBulb V1 RGBW Bulb (EZBULB_V1)
Available from:
Th3dstudio.com
Manufacturer:
Th3dstudio.com
Install method:
Tasmota pre-installed
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | None |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"EZBulb V1","GPIO":[0,0,0,0,37,40,0,0,38,0,39,0,0],"FLAG":0,"BASE":18}
This device comes with Tasmota already installed!
See Tasmota documentation on how to configure RGBW lights to your needs.
Pre-flashed with TH3D version of firmware. You can update over Wi-Fi to standard Tasmota.
Converting the EZPlug from TH3D Firmware to Tasmota:
- Download the latest tasmota-minimal.bin.gz and flash it from the GUI
- Download the latest tasmota.bin.gz and flash it from the GUI
- Reset the EZPlug configuration to clear out the config to prevent errors
- Use it with standard Tasmota!