EZPlug V1 OpenSource Plug
Available from:
Th3dstudio.com
Manufacturer:
Th3dstudio.com
Install method:
Tasmota pre-installed
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Led_i 1 |
| GPIO14 | Relay 1 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"EZPlug V1","GPIO":[0,0,0,32,0,0,0,0,0,320,224,0,0,0],"FLAG":0,"BASE":1}
This device comes with Tasmota already installed!
Pre-flashed with TH3D version of firmware. You can update over wifi to standard Tasmota.
Converting the EZPlug from TH3D Firmware to Tasmota:
- Download the latest tasmota-minimal.bin and flash it from the GUI
- Download the latest tasmota.bin and flash it from the GUI
- Reset the EZPlug configuration to clear out the config to prevent errors
- Use it with standard Tasmota!