{"NAME":"FEIT CFC40","GPIO":[0,0,0,0,0,0,0,0,0,0,416,0,0,0],"FLAG":0,"BASE":18}

WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2021-06-12).

To flash this bulb, I used tuya-convert and then upgraded to the full image.

Note I used tuya-convert-os (https://github.com/qtoggle/tuya-convert-os). If you do this, log into the console of your rpi and do the convert from the command line (sudo su; cd /root;) the web gui did not allow me to chose an image which left the bulbs half flashed. I had to re-flash them to finish the tasmota install.”