Foxnovo IP44 Dual Outdoor Plug (SOP06-US)
Available from:
Amazon.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led_i 1 |
| GPIO05 | Led_i 2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay 1 |
| GPIO13 | Button 1 |
| GPIO14 | Relay 2 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"SOP06-US","GPIO":[0,0,0,0,320,321,0,0,224,32,225,0,0,0],"FLAG":0,"BASE":18}Pry out rubber screw covers and use a small flat head screwdriver to remove the security screws. Remove the PC board by removing 5 more security screws (two holding cord and three holding the PC board). Make/solder temporary wires to TYWE2S microcontroller board on GND, VCC, TX, RX and IO0 (GPIO0) jumpered to ground and Tasmotize.
Pinout
.