Geeni Surge Mini Power Strip (GN-SW004-199)
Available from:
Amazon.com
Manufacturer:
Mygeeni.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1i |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button1 |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay2 |
| GPIO13 | Relay1 |
| GPIO14 | Relay3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Geeni-GN-SW004","GPIO":[56,0,0,17,0,0,0,0,22,21,23,0,0],"FLAG":15,"BASE":18}This device now comes with a Wi-Fi module incompatible with Tasmota
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!Tuya-Convert might not be possible for this device since the template was added (2019-12-13).
Update 6 June 2021: The Geeni Surge Mini is now being sold with the incompatible Tuya WB3S chip.
It is possible to successfully desolder this chip from the daughterboard (e.g. with a heat gun) and replace it with an ESP-12F to continue using the template on this page.