Geeni Surge + Charge 2 USB Power Strip (GN-SW023-199)
Available from:
Amazon.com
Amazon.ca
Manufacturer:
Mygeeni.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay2 |
| GPIO05 | Relay1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay3 |
| GPIO13 | Relay4 |
| GPIO14 | Relay5 |
| GPIO15 | None |
| GPIO16 | Button1 |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Geeni GN-SW023","GPIO":[52,0,0,0,22,21,0,0,23,24,25,0,17],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-10-13).
Tuya-Convert might not be possible for this device since the template was added (2020-10-13).
Button next to Plug 1 will also work as switch to all Plugs, depending on number of clicks; 1 click will toggle Plug 1, 2 clicks will toggle Plug 2, etc. Also, Relay 5 controls both USB ports, as one.