GHome EP2-A Power Monitoring Plug (EP2-A)
Available from:
Amazon.de
Amazon.es
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | LedLinki |
| GPIO01 | None |
| GPIO02 | Led_i 1 |
| GPIO03 | None |
| GPIO04 | HLWBL CF1 |
| GPIO05 | BL0937 CF |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Button 1 |
| GPIO14 | None |
| GPIO15 | Relay 1 |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"GHome EP2-A","GPIO":[576,0,320,0,2656,2720,0,0,2624,32,0,224,0,0],"FLAG":0,"BASE":45}
For more accurate energy consumption measurements this device requires power monitoring calibration.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2023-12-09).
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2023-12-09).
If you prefer the blue LED (instead of the green one) to represent “Power ON”, swap Led1i and LedLinki in the Configure Template page.