Girier 16A Power Monitoring Plug (JR-PM01)
Available from:
Aliexpress.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | LedLink |
| GPIO02 | None |
| GPIO03 | HLWBL SELi |
| GPIO04 | BL0937 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1 |
| GPIO14 | Led1i |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Girier - JR-PM01","GPIO":[0,157,0,131,134,132,0,0,21,17,56,0,0],"FLAG":0,"BASE":68}
For more accurate energy consumption measurements this device requires power monitoring calibration.
How to open the plug
Unsupported hardware
I bought it few weeks ago in Girier Official Store on Aliexpress. There is TW-02 V2.0 (W600) chip on board. This can’t be flashed to Tasmota
But it can be controlled by MQTT via tuya-mqtt
