Gosund NiteBird RGB LED Strip (SL1)
Available from:
Amazon.com
Alza.de
Manufacturer:
Alibaba.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Button 1 |
| GPIO05 | PWM 2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM 1 |
| GPIO13 | PWM 3 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | ADC Light |
Configuration
{"NAME":"Gosund LED Strip","GPIO":[0,0,0,0,32,417,0,0,416,418,0,0,0,4768],"FLAG":0,"BASE":18}Configuration (old format, will be converted to new template when applied)
{"NAME":"Gosund LED Strip","GPIO":[17,0,0,0,0,0,0,0,37,39,38,0,0],"FLAG":3,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-06-18).
Tuya-Convert might not be possible for this device since the template was added (2020-06-18).
Other versions of the controller might use a different layout. Version BT01-T-V2.2 of the board uses GPIO5 for PWM2 (instead of GPIO15):