{"NAME":"Gosund SP111 v1.1","GPIO":[56,0,158,0,132,134,0,0,131,17,0,21,0],"FLAG":0,"BASE":45}

For more accurate energy consumption measurements this device requires power monitoring calibration.

This layout is for PCB marked as “SP111_A_Wifi_Ver1.1”. It has the “3450W max” label.

To enter programming mode:

1. Power the device with GPIO2 connected to GND. Red LED should turn on.
2. After couple of seconds, remove the connection between GPIO2 and GND. The red LED should then turn off.
3. The device is ready to be flashed.

If the template doesn’t work see other hardware versions of the same plug:

• Gosund SP111
• Gosund SP111 v1.4