Logo
Gosund Dual Power Monitoring Plug (SP211)
EU
Gosund Dual

Available from:
Amazon.de
Aliexpress.com
Alza.de
Banggood.com
Mediarath.de

Manufacturer:
Alibaba.com

Install method:
Tuya-Convert

GPIO #Component
GPIO00 Button2
GPIO01 LedLinki
GPIO02 Led1i
GPIO03 HLWBL SELi
GPIO04 BL0937 CF
GPIO05 HLWBL CF1
GPIO09 None
GPIO10 None
GPIO12 Button1
GPIO13 Led2i
GPIO14 Relay1
GPIO15 None
GPIO16 Relay2
FLAG None
Configuration (old format, will be converted to new template when applied)
{"NAME":"Gosund SP211","GPIO":[18,158,56,131,134,132,0,0,17,57,21,0,22],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.

WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-06-05).

Use code BLAKADDER10 when buying from mediarath.de Tasmota category for a 10% discount. Code is valid until end of 2022.

Enable tuya-convert flash

Pair the device with the official Gosund app. Contact globalservice@gosund.com with the device ID, your account email and a confirmation that you are aware of voiding the warranty if you flash the device with other firmware. As soon as the IDs have been activated by Gosund support (typically takes 24h), you can update the device to firmware 1.06 in the Gosund app. With this firmware, you can now flash the device using tuya-convert.