Govee E27 5W 500lm RGBCCT Bulb (2AQA6-H6086)

Available from:
Shopee.tw
Install method:
Replace module
GPIO # | Component |
---|---|
GPIO00 | User |
GPIO01 | User |
GPIO02 | User |
GPIO03 | PWM 3 |
GPIO04 | PWM 2 |
GPIO05 | PWM 5 |
GPIO09 | User |
GPIO10 | User |
GPIO12 | None |
GPIO13 | User |
GPIO14 | None |
GPIO15 | None |
GPIO16 | None |
GPIO17 | None |
GPIO014 | None |
GPIO015 | None |
GPIO016 | None |
GPIO017 | None |
GPIO018 | PWM 1 |
GPIO019 | PWM 4 |
GPIO020 | User |
GPIO021 | User |
Configuration
{"NAME":"Govee E27","GPIO":[1,1,1,418,417,420,1,1,0,1,0,0,0,0,0,0,0,0,416,419,1,1],"FLAG":0,"BASE":1}
This device uses
T103
module which needs to be replaced with
an ESP
module. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.
The device has realtek RTL8710BX chip, this requires a chip swap and the pinout matches ESP-12. Remove the E27 base using pliers, then push the bottom screw with a thin screwdriver before pulling the pcb out.