Hama 4.5W RGBW Bulb (00176549)
Available from:
Amazon.de
Manufacturer:
Hama.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | None |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"hama E14 RGB","GPIO":[0,0,0,0,37,40,0,0,38,0,39,0,0],"FLAG":0,"BASE":18}
See Tasmota documentation on how to configure RGBW lights to your needs.
Tried Tuya-Convert first and did not succeed.
Opened up the device and disassembled the LED-Module from the other pcb inside the bulb. It was only plugged together. The ESP-Module had to be soldered out. Looked similar to an ESP-01.