HaoDeng Plug
Available from:
Amazon.de
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay1 |
| GPIO05 | Button1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Led1i |
| GPIO13 | Led2 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"HaoDeng","GPIO":[0,0,0,0,21,17,0,0,56,53,0,0,0],"FLAG":0,"BASE":61}Pinout is noted on the backside of the board, you have to fully disassemble it. You will find 2x GNC, 2x 3,3V, TX, RX and I00 (=GIOP001), to flash shortcut I00 and GND when starting device. Might need several tries until success.