Heltec WiFi Kit 8 Display
Available from:
Amazon.com
Aliexpress.com
Manufacturer:
Heltec.org
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | User |
| GPIO03 | User |
| GPIO04 | I2C SDA 1 |
| GPIO05 | I2C SCL 1 |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | User |
| GPIO13 | User |
| GPIO14 | User |
| GPIO15 | User |
| GPIO16 | OLED Reset |
| GPIO17 | User |
Configuration
{"NAME":"WifiKit8","GPIO":[1,1,1,1,640,608,1,1,1,1,1,1,1024,1],"FLAG":0,"BASE":18}Configuration (old format, will be converted to new template when applied)
{"NAME":"HTIT-W8266","GPIO":[255,255,255,255,6,5,0,0,255,255,255,255,162],"FLAG":15,"BASE":18}Display Info:
DisplayModel 2
DisplayHeight 32
DisplayAddress 60
Note: since version 8.1.0.3, there is no need to wire a 1K resistor between GPIO16 and RST anymore, just configure GPIO16 as OLED Reset
You will of course need to use a Tasmota build that supports displays.