HIPER IoT C1 RGBCCT Bulb (HI-C1RGB)
Available from:
Ozon.ru
Manufacturer:
Hiper-power.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | SM2135 DAT |
| GPIO13 | None |
| GPIO14 | SM2135 CLK |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Hiper IoT C1 RGB","GPIO":[0,0,0,0,0,0,0,0,181,0,180,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-14).
Tuya-Convert might not be possible for this device since the template was added (2020-07-14).
Note: SetOption37 30 is needed for correct re-mapping of RGBWcWw channels. Basically the settings for this bulb are identical to https://templates.blakadder.com/luminea_ZX-2983.html