Homecube Curtain Switch
Available from:
Amazon.de
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button2 |
| GPIO04 | Relay2 |
| GPIO05 | Button3 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button1 |
| GPIO13 | Relay1 |
| GPIO14 | None |
| GPIO15 | Relay3 |
| GPIO16 | None |
| FLAG | Analog |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Jinvoo Curtain","GPIO":[52,0,0,18,22,19,0,0,17,21,0,23,0],"FLAG":1,"BASE":18}
Requires configuring shutter support.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-03).
Use the same setting like “Jinvoo SM-SW101-C Curtain Switch “ including all options
