Hyrican SmartPlug 16A Power Monitoring Plug (TM-MP-EU02)
Available from:
Otto.de
Idealo.de
Manufacturer:
Hyrican.de
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | HLWBL CF1 |
| GPIO05 | HLWBL SELi |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay 1 |
| GPIO13 | BL0937 CF |
| GPIO14 | Led_i 1 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"Hyrican TM-MP-EU02","GPIO":[0,0,0,32,2656,2624,0,0,224,2720,320,0,0,0],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.
This device uses WB2S module which needs to be replaced with ESP-02S, WT-01N or WT32C3-01N. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.
This device uses WB2S module which needs to be replaced with ESP-02S, WT-01N or WT32C3-01N. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.
Once the WB2S has been replaced with the TYWE2S, the following template can be used.