Infray 9W 900LM RGBCCT Bulb
Available from:
Amazon.de
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | PWM5 |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"InfrayRGBCCT","GPIO":[0,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-03-17).
Tuya-Convert might not be possible for this device since the template was added (2020-03-17).
To flash with tuya-convert: turn on the lamp and it will be cold white. Turn on and off three times (intervals less than 10 seconds) until the lamp flashes. After 3 minutes of no activity, it goes back to normal cold white.