iSwitch Touch Switch Dimmer (MG-USD33RE)
Available from:
Iswitchoz.com.au
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | Led3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"iSwitchOZ Dimmer","GPIO":[0,0,0,0,0,0,0,0,0,0,54,0,0],"FLAG":0,"BASE":54}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-05-15).
Tuya-Convert might not be possible for this device since the template was added (2020-05-15).
A TuyaMCU based dimmer switch with power monitoring.
As at May 2020, readily flash-able using tuya-convert. Best not to connect to the device in advance with a Tuya app to avoid flashing new firmware.
After configuring your WiFi details and configuring the template, use the console to issue the following commands :
Backlog TuyaMCU 21,2; TuyaMCU 33,6; TuyaMCU 31,5; TuyaMCU 32,4; DimmerRange 1,24
If that doesn’t work try following instructions at https://tasmota.github.io/docs/TuyaMCU/