Jinvoo SM-SW101-3
Switch
Available from:
Amazon.de
Manufacturer:
Xenon.cn
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button2 |
| GPIO04 | Relay2 |
| GPIO05 | Button3 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button1 |
| GPIO13 | Relay1 |
| GPIO14 | None |
| GPIO15 | Relay3 |
| GPIO16 | None |
| FLAG | Analog |
Template
{"NAME":"Jinvoo Wall Sw","GPIO":[52,0,0,18,22,19,0,0,17,21,0,23,0],"FLAG":1,"BASE":18}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.