Kisslink SP200 Plug
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led1i |
| GPIO05 | Led2i |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | Analog |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Kisslink SP200","GPIO":[0,0,0,0,56,57,0,0,21,17,0,0,0],"FLAG":1,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2019-12-30).
Tuya-Convert might not be possible for this device since the template was added (2019-12-30).
Configured as most plug templates: flashing blue if not connected. No LED if connected. Red LED when on.
