{"NAME":"Kogan Panel Heater","GPIO":[0,0,0,0,0,0,0,0,0,108,0,107,0],"FLAG":0,"BASE":54}

WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-09-30).

Wifi module is mounted on the inside of the unit, at the top next to the control panel buttons, you need to remove the entire back of the unit to access.

Functions

• dpID 1 device mode: 0 = off / 1 = on Type1
• dpID 2 set temperature ?: 16 - 30 (Celsius) Interger Type 2
• dpID 3 temperature sensor Room temperature, read only Type 2
• dpID 4 function mode ‘0 = Cool / 1 = Fan / 2 = Dry / 3 = Heat` Type 4
• dpID 5 speed mode: 0 = Slow / 1 = Medium / 2 = Fast Type 4
• dpID 19 temprature units: 0 = celsius / 1 = fahrenheit Type4
• dpID 102 unknown: Type1
• dpID 103 timer (hours): 0 = off / 1 = 1 hour / 2 = 2 hours / 3 = 3 hours not needed with Tasmota, there’s a Timer function Type4
• dpID 104 swing mode: 0 = off / 1 = on Type1
• dpID 105 timer (minutes): read only timer (dpID103) in minutes Type 2
• dpID 106 water tank is full: Type 0
• dpID 110 unknown: Type 2

Backlog TuyaMCU 11,1; TuyaMCU 72,2; TuyaMCU 71,3; TuyaMCU 62,4; TuyaMCU 61,5; TuyaMCU 63,19; TuyaMCU 81,103; TuyaMCU 2,104; 

All data seems to be available via MQTT data to home assistant. It is the best way to control the unit, more information on that in the Kogan panel heater template

---