Kogan Energy Meter Power Monitoring Plug (KASPEMHA)
Available from:
Kogan.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | HLW8012 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Led1i |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Kogan Smart Sw","GPIO":[17,0,0,0,133,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":18}This device now comes with a Wi-Fi module incompatible with Tasmota
For more accurate energy consumption measurements this device requires power monitoring calibration.WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2019-03-31).
Warning
Models purchased from Kogan on May 2021 do NOT contain ESP8285 or other Tasmota compatible CPUs. They are shipped with WB25 modules. Note though there there is likely room in the unit to desolder the WB25 daughterboard and replace it with a esp12F or similar.