Koogeek Power Monitoring Plug (KLUP1)
Available from:
Amazon.co.uk
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button1 |
| GPIO04 | BL0937 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Led1i |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Koogeek-KLUP1","GPIO":[0,0,0,17,134,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.
Works with tuya convert. Upgrade to sonoff.bin after flashing.
Alternative template if the first one doesn’t work
Template {"NAME":"Koogeek-KLUP1","GPIO":[0,0,56,0,0,134,0,0,131,17,132,21,0],"FLAG":0,"BASE":1}
After recently ordering 2x KLUP1 Plugs, and having them work fine with This Profile I was surprised when I ordered a third, and it did not work out of the OTA Update process.