Logo
Kuled 800lm RGBW Bulb
E26
Kuled 800lm

Available from:
Amazon.ca







GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 PWM3
GPIO05 PWM4
GPIO09 None
GPIO10 None
GPIO12 PWM1
GPIO13 None
GPIO14 PWM2
GPIO15 None
GPIO16 None
FLAG Analog
Configuration (old version)
{"NAME":"KULED 60W RGB","GPIO":[0,0,0,0,39,40,0,0,37,0,38,0,0],"FLAG":1,"BASE":18}
See Tasmota documentation on how to configure RGBW lights to your needs.

You need to change a few options. This differs from the generic because of the remapped LED channels. Use tasmota-wifiman.bin firmware.

Tested with tasmota 7.0.0.4, works great. Cool white is simulated.

setoption15 1
setoption17 1
setoption37 30

To remap the LED channels. (Blue works without this, but red and green are swapped, and intermediate colours don’t work without this command)
setoption59 1