Logo
Lanberg 9W RGBW Bulb
E27
Model reference: SM01-WBE27
Lanberg 9W

Available from:
Ceneo.pl




Manufacturer:
Lanberg.pl

Flashed with:
Tuya-Convert

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 User
GPIO05 PWM 4
GPIO09 None
GPIO10 None
GPIO12 PWM 1
GPIO13 None
GPIO14 PWM 3
GPIO15 PWM 2
GPIO16 None
GPIO17 None
Template for Tasmota v9.1+
{"NAME":"Lanberg E27 9W RGBW","GPIO":[0,0,0,0,1,419,0,0,416,0,418,417,0,0],"FLAG":0,"BASE":18}
See Tasmota documentation on how to configure RGBW lights to your needs.

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published (2021-06-29).

Bulb is using two chips to control LEDs by PWM:

  • for white LEDs is SM2083EGL - GPIO 5
  • for RGB LEDs is SM15133EK - GPIO 12, GPIO 15, GPIO 14

If you want have white color with white LEDs (than mix of RGB LEDs), then in console you need to set: SetOption105 1 new format Template (Tasmota 9.5+) with command:

{"NAME":"Lanberg E27 9W RGBW","GPIO":[0,0,0,0,1,419,0,0,416,0,418,417,0,0],"FLAG":0,"BASE":18,"CMND":"so105 1"}