Laser 10W 1000lm
CCT
Bulb
Model reference: LSH-E27WW10W
Available from:
Laserco.com.au
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | PWM1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | PWM2 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Template
{"NAME":"Laster 10W CCT","GPIO":[0,0,0,0,0,37,0,0,0,38,0,0,0],"FLAG":0,"BASE":18}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
Took a few tries to get the OTA update to recognise the bulb. Just try again and be patient.