Lenovo SE-341A Plug (ZG38C02793)
Available from:
Jbhifi.com.au
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Button1 |
| GPIO05 | Relay1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | LedLinki |
| GPIO13 | None |
| GPIO14 | Led1i |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Lenovo SE-341A","GPIO":[0,0,0,0,17,21,0,0,158,0,56,0,0],"FLAG":0,"BASE":18}Device does not work with tuya-convert, as it never enters the required pairing mode (will only slow flash and output a wifi signal). To open the device, it is held in place with clips on the side & top/bottom (small screwdriver or opening tool highly recommended). Ground, 3.3v, Rx/Tx are all labeled.