Lenovo SE-341A Plug (ZG38C02793)
Lenovo SE-341A

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Button1
GPIO05 Relay1
GPIO09 None
GPIO10 None
GPIO12 LedLinki
GPIO13 None
GPIO14 Led1i
GPIO15 None
GPIO16 None
Configuration (old format, will be converted to new template when applied)
{"NAME":"Lenovo SE-341A","GPIO":[0,0,0,0,17,21,0,0,158,0,56,0,0],"FLAG":0,"BASE":18}

Device does not work with tuya-convert, as it never enters the required pairing mode (will only slow flash and output a wifi signal). To open the device, it is held in place with clips on the side & top/bottom (small screwdriver or opening tool highly recommended). Ground, 3.3v, Rx/Tx are all labeled.