Logo
LITEdge Smart Power Strip Power Strip (SW1SPST-WIFI-SCE)
US
LITEdge Smart Power Strip

Available from:
Amazon.com







Install method:
USB to Serial

GPIO #Component
GPIO00 Relay 4
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Led 1
GPIO05 Led 2
GPIO09 None
GPIO10 None
GPIO12 Relay 1
GPIO13 Button 1
GPIO14 Relay 2
GPIO15 Relay 3
GPIO16 Relay 5
GPIO17 None
Configuration
{"NAME":"LITEEdge Power Strip","GPIO":[227,0,0,0,288,289,0,0,224,32,225,226,228,0],"FLAG":0,"BASE":18}

Uses a standard ESP-12F; solder wires to Tx/Rx/VCC/Gnd/GPIO0 and flash using esptool.