LoraTap In-Wall Curtain Module (SC511WSC)
Available from:
Aliexpress.com
Manufacturer:
Loratap.com
Install method:
Tuya-Convert
GPIO # | Component |
---|---|
GPIO00 | None |
GPIO01 | User |
GPIO02 | None |
GPIO03 | Led1i |
GPIO04 | Button1 |
GPIO05 | Button3 |
GPIO09 | None |
GPIO10 | None |
GPIO12 | Relay1 |
GPIO13 | Button2 |
GPIO14 | Relay3 |
GPIO15 | Relay2 |
GPIO16 | None |
FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"SC511WSC","GPIO":[0,255,0,56,17,19,0,0,21,18,23,22,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-04).
Tuya-Convert might not be possible for this device since the template was added (2020-02-04).
WARNING! LoraTap is using ESP8266 and Realtek Wi-Fi modules on same model devices. Check seller descriptions or contact them before buying!
Flashed with tuya-convert with standard tasmota.bin
Works with RF Remote
pulsetime1 130 # 30 seconds of pulsetime for open
pulsetime2 1 # Pulsetime for stop
pulsetime3 130 # 30 seconds of pulsetime for close
Backlog Delay 50; Interlock 1,2,3; Interlock on; PowerOnState 0; PowerRetain 0; setoption1 1; setoption26 1; Restart 1
Backlog ShutterButton1 1 up 0; ShutterButton1 2 down 0