LSC Dual Socket Outdoor Plug (3004200)
Available from:
Action.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | Led_i 1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | Relay_b 2 |
| GPIO05 | Relay_b 1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | Relay_b 3 |
| GPIO15 | None |
| GPIO16 | Relay_b 4 |
| GPIO17 | None |
Configuration
{"NAME":"LSC Outdoor Dual Socket","GPIO":[320,0,0,32,8673,8672,0,0,0,0,8674,0,8675,0],"FLAG":0,"BASE":18}
This device uses
a Tasmota incompatible
module which needs to be replaced with
an ESP. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.
The Button is connected to GPIO15 so you have to cut this line and route it to the GPIO3(RX) Pin. In my case I use the ESP12F we also need GPIO15 grounded and a bridge from VCC to EN.