{"NAME":"LSC RGBW Strip","GPIO":[51,0,0,0,37,0,0,0,38,40,39,0,0],"FLAG":0,"BASE":18}

This device now comes with a Wi-Fi module incompatible with Tasmota

Warning

As of November 2021 this product can ship with a different chip that can not be replaced with a ESP-12 chip.

As of July 2020 this device comes with a Tuya WB3S module which cannot be flashed with Tasmota.
That module is pin compatible with ESP-12 and can ordered via Ebay. Replace the module with a hot air gun. All LEDs are usable R,G,B,CW,WW and you can dimm it.

{"NAME":"LSC RGBW Strip","GPIO":[51,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}

To use the build in IR Receiver connected to GPIO00 as IRrecv (if this cannot be selected under configuration use Tasmota-Sensors.bin) add the following rule via Command Line.

Rule1 ON IrReceived#Data=0x00F740BF do power off ENDON ON IrReceived#Data=0x00F7C03F do power on ENDON ON IrReceived#Data=0x00F700FF do dimmer + ENDON ON IrReceived#Data=0x00F7807F do dimmer - ENDON ON IrReceived#Data=0x00F720DF do color2 ff0000 ENDON ON IrReceived#Data=0x00F7A05F do color2 00ff00 ENDON ON IrReceived#Data=0x00F7609F do color2 0000ff ENDON

Rule2 ON IrReceived#Data=0x00F710EF do color2 ff5000 ENDON ON IrReceived#Data=0x00F7906F do color2 aeff00 ENDON  ON IrReceived#Data=0x00F750AF do color2 0077ff ENDON ON IrReceived#Data=0x00F730CF do color2 f2ba41 ENDON ON IrReceived#Data=0x00F7B04F do color2 41e3f2 ENDON ON IrReceived#Data=0x00F7708F do color2 a80355 ENDON ON IrReceived#Data=0x00F708F7 do color2 fcce62 ENDON ON IrReceived#Data=0x00F78877 do color2 25a9c4 ENDON ON IrReceived#Data=0x00F748B7 do color2 c4254a ENDON

Rule3 ON IrReceived#Data=0x00F728D7 do color2 fcfc05 ENDON ON IrReceived#Data=0x00F7A857 do color2 2d7c93 ENDON ON IrReceived#Data=0x00F76897 do color2 fc5582 ENDON ON IrReceived#Data=0x00F7E01F do color2 ffffff ENDON ON IrReceived#Data=0x00F7E817 do scheme 2 ENDON ON IrReceived#Data=0x00F7C837 do scheme 3 ENDON ON IrReceived#Data=0x00F7F00F do scheme 4 ENDON ON IrReceived#Data=0x00F7D02F do Power 3 ENDON

Don’t forget to enable the rule with ‘Rule1 1’!

The IR commands don’t look complete but support ON/OFF and RGBW Color changes.

Other IR Commands
Light Red: ON IrReceived#Data=0x00F710EF DO color #CC660000 ENDON
Orange: ON IrReceived#Data=0x00F730CF DO color #FF800000 ENDON
Peach: ON IrReceived#Data=0x00F708F7 DO color #FFB26600 ENDON
Yellow: ON IrReceived#Data=0x00F728D7 DO color 10 ENDON
Light Green: ON IrReceived#Data=0x00F7906F DO color #66FF6600 ENDON
Cyan: ON IrReceived#Data=0x00F7B04F DO color #99FF9900 ENDON
Aqua Green: ON IrReceived#Data=0x00F78877 DO color 8 ENDON
Hunter Green: ON IrReceived#Data=0x00F7A857 DO color #00660000 ENDON
Light Blue: ON IrReceived#Data=0x00F750AF DO color #9999FF00 ENDON
Purple: ON IrReceived#Data=0x00F7708F DO color #6600CC00 ENDON
Light Purple: ON IrReceived#Data=0x00F748B7 DO color 9 ENDON
Pink: ON IrReceived#Data=0x00F76897 DO color 11 ENDON

Incomplete IR Commands
Flash: ON IrReceived#Data=0x00F7D02F DO ENDON
Strobe: ON IrReceived#Data=0x00F7F00F DO ENDON
Fade: ON IrReceived#Data=0x00F7C837 DO Backlog Scheme 4; Speed 1 ENDON
Smooth: ON IrReceived#Data=0x00F7E817 DO Backlog Scheme 4; Speed 40 ENDON

Source for IR settings