Luminea 16A Outdoor Plug (NX-4655)
Available from:
Amazon.de
Idealo.de
Pearl.de
Manufacturer:
Luminea.info
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led_i 1 |
| GPIO05 | LedLinki |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay 1 |
| GPIO13 | Button 1 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"NX-4655-675","GPIO":[0,0,0,0,320,576,0,0,224,32,0,0,0,0],"FLAG":0,"BASE":18}Carefully pull off the green cap. This is not glued. Then loosen the 2 triangular screws. After that the whole unit can be taken out. GPIO0 is on the small TYWE2S. Solder 3.3V, GND, TX and RX and for flashing ground the GPIO0.
Pinout
.