LVWIT G45 5W 470Lm RGBCCT Bulb (X00135AN2J)
Available from:
Amazon.de
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | SM2135 DAT |
| GPIO13 | None |
| GPIO14 | SM2135 CLK |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"LVWIT E14 5W G45 RGBWCCT","GPIO":[0,0,0,0,0,0,0,0,181,0,180,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-06-06).
Tuya-Convert might not be possible for this device since the template was added (2020-06-06).
SetOption37 30 or the R and G will be reversed -
Instructions in the box were wrong: To get into Discovery Mode - Don’t wait 10 seconds. Turn bulb on & off 3 times and wait
Newer version, probably called “G45-2”, isn’t flashable with tuya-convert. Opening it might be as bad as with Feit Electric A19.