Logo
M5Stack M5Stick Display (K016)
M5Stack M5Stick

Available from:
Tinytronics.nl
Amazon.com




Manufacturer:
Shop.m5stack.com


GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 I2C SCL 1
GPIO14 SPI CS
GPIO15 None
GPIO16 None
GPIO17 IRsend
GPIO18 SPI CLK
GPIO19 LedLink
GPIO20 None
GPIO21 I2C SDA 2
GPIO22 I2C SCL 2
GPIO23 SPI MOSI
GPIO24 None
GPIO25 I2C SDA 1
GPIO26 Buzzer
GPIO27 SPI DC
GPIO6 Option A3
GPIO7 None
GPIO8 None
GPIO11 None
GPIO32 None
GPIO33 OLED Reset
GPIO34 None
GPIO35 Button 1
GPIO36 None
GPIO37 None
GPIO38 None
GPIO39 None
Configuration for ESP32
{"NAME":"M5Stick","GPIO":[0,0,0,0,0,0,0,0,0,608,768,0,0,1056,736,544,0,641,609,704,0,640,480,800,6210,0,0,0,0,1024,0,32,0,0,0,0],"FLAG":0,"BASE":1}
Use code BLAKADDER17 when buying from shop.m5stack.com store for a 5% discount.

Flashing

Flash using Tasmota Web Installer and select tasmota32-lvgl option.
For esptool.py download f.e. tasmota32-lvgl.factory.bin and run esptool.py write_flash 0x0 tasmota32-lvgl.factory.bin.

Auto-configuration

After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.

This device uses an FTDI serial-to-USB chip. If your device isn’t found install drivers.