Logo
M5Stack Tough Display (K034)
M5Stack Tough

Available from:
Shop.m5stack.com





Manufacturer:
Docs.m5stack.com

Install method:
USB to Serial

GPIO #Component
GPIO00 Option A3
GPIO01 User
GPIO02 User
GPIO03 User
GPIO04 SDCard CS
GPIO05 SPI CS
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 User
GPIO14 User
GPIO15 SPI DC
GPIO16 None
GPIO17 None
GPIO18 SPI CLK
GPIO19 User
GPIO20 None
GPIO21 I2C SDA 2
GPIO22 I2C SCL 2
GPIO23 SPI MOSI
GPIO24 None
GPIO25 None
GPIO26 None
GPIO27 User
GPIO6 None
GPIO7 None
GPIO8 None
GPIO11 None
GPIO32 I2C SDA 1
GPIO33 I2C SCL 1
GPIO34 User
GPIO35 User
GPIO36 User
GPIO37 None
GPIO38 SPI MISO
GPIO39 CM110x RX
Configuration for ESP32
{"NAME":"M5Stack Tough","GPIO":[6210,1,1,1,6720,768,0,0,0,1,1,800,0,0,736,1,0,641,609,704,0,0,0,1,0,0,0,0,640,608,1,1,1,0,672,7968],"FLAG":0,"BASE":1}
Use code BLAKADDER17 when buying from shop.m5stack.com store for a 5% discount.

Flashing

Flash using Tasmota Web Installer and select tasmota32-lvgl option.
For esptool.py download f.e. tasmota32-lvgl.factory.bin and run esptool.py write_flash 0x0 tasmota32-lvgl.factory.bin.

Auto-configuration

After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.

Fully supported with all sensors and SD card.