Magic UFO RGBW LED Controller (26-011-945)
Available from:
Amazon.de
Aliexpress.com
Amazon.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | LedLink |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | PWM1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM3 |
| GPIO13 | PWM4 |
| GPIO14 | PWM2 |
| GPIO15 | Led1i |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Magic UFO","GPIO":[17,0,157,0,0,37,0,0,39,40,38,56,0],"FLAG":0,"BASE":18}
From LEFT to RIGHT:
- VCC (First Red Cable - soldered on LVR IC)
- RX (Second Red Cable - soldered on ESP8285 RXD0)
- TX (First Yellow Cable - soldered on ESP8285 TXD0)
- GND (Second Yellow Cable - soldered on PCB)
FOr entering programming mode, short GND to IO0 on ESP
.jpg)