MakeGood 2 Gang Switch (MG-MD04W)
Available from:
Alibaba.com
Manufacturer:
Szmakegood.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | Led3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"MakeGood 2 Gang","GPIO":[0,0,0,0,0,0,0,0,0,0,54,0,0],"FLAG":0,"BASE":54}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-01).
Tuya-Convert might not be possible for this device since the template was added (2020-07-01).
To get the TuyaMCU configured correctly, after flashing and updating the template, run the following command:
Backlog TuyaMCU 11,1; TuyaMCU 12,2; TuyaMCU 32,102; TuyaMCU 31,103; TuyaMCU 33,104;
For further questions visit GitHub discussion