Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
For more accurate energy consumption measurements this device requires power monitoring calibration.
Found under different IDs: Hi-UKWFWS01 or Hi-UKWSG01 or MG-UKWSW
I based this loosely on the MakeGood template found here and made some changes. The only thing I did not manage to get working is the low blue LED light when the socket is switched off. LED for power on works fine.
Also be sure to run the commands:
SwitchMode1 5 and