Martin Jerry SD01
Dimmer
Model reference: MJ-SD01
Available from:
Amazon.com
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Button3 |
| GPIO01 | Button2 |
| GPIO02 | None |
| GPIO03 | Led4i |
| GPIO04 | LedLinki |
| GPIO05 | Led3i |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Led2i |
| GPIO13 | PWM1 |
| GPIO14 | Led1i |
| GPIO15 | Button1i |
| GPIO16 | Relay1i |
| FLAG | None |
Template
{"NAME":"MJ-SD02","GPIO":[19,18,0,59,158,58,0,0,57,37,56,122,29],"FLAG":0,"BASE":73}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
Requires enabled PWM Dimmer support in Tasmota v8.2 or newer. Follow the article instructions for configuration.
FCC ID 2ANJ7-SD01