Logo
Merkury Innovations MI-EW003-999W LED Strip
US
Model reference: MI-EW003-999W
Merkury Innovations MI-EW003-999W

Available from:
Walmart.com
Walmart.ca





Install method:
Serial Flashing

GPIO #Component
GPIO00 Button1
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 PWM1
GPIO05 PWM4
GPIO09 None
GPIO10 None
GPIO12 PWM2
GPIO13 PWM5
GPIO14 PWM3
GPIO15 None
GPIO16 None
FLAG None
Configuration (old version)
{"NAME":"MI-EW003-999W ","GPIO":[17,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}

This is very similiar to the “BW-LT11 Strip Module” except it has both Cold White and Warm White LEDs and works flawlessly with tasmota 6.5.0.

Serial Flashing

PCB Model JRT-WIFI-K7Q01(2a)-PZG Rev 2.0 20200107 was not compatible with tuya-convert and needed to be flashed serially. There are two pads for RX and TX on the PCB to communicate via a serial link.
To power the unit, simply plug the attached USB Power interface; no need to solder the VCC and GRND connections. To put the device in Flash Mode, simple press the onboard button while powering-up the device (Plugging the USB Connection)