{"NAME":"Mi Desk Lamp","GPIO":[0,0,17,0,37,38,0,0,150,151,0,0,0],"FLAG":0,"BASE":66}

As of Tasmota version 6.5.0.5 this device requires a self compiled version of Tasmota with the flag #define ROTARY_V1 in my_user_config.h uncommented.

Serial Flashing

You can open the lamp by unscrewing the three screws at the bottom of the lamp (under the rubber feets). The main pcb should look like this:

Solder Connections to U0RX, U0TX, GPIO0 and GND on main PCB.

Connect U0RX, U0TX and GND to USB serial adapter, pull GPIO0 to GND.