Minitiger 1 Gang v2 Switch (MT-Wifi-01)
Minitiger 1 Gang v2

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 Led_i 1
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 Button 1
GPIO09 None
GPIO10 None
GPIO12 Relay 1
GPIO13 None
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None

To be able to see blue light use this command in console LedPower1 1

But you can flash it very easy with the 6 pins on the front panel. The pin is (left to right, when you have the pin on top) 3,3v | Rx | Tx | Gpio0 | Rst | GND (source).

Connect Gpio0 and GND together to enter in “flash mode”