Minitiger 2 Gang Switch (FS-WC-E01)
Minitiger 2 Gang

Available from:

GPIO #Component
GPIO00 Button1
GPIO01 User
GPIO02 User
GPIO03 User
GPIO04 None
GPIO05 Relay2
GPIO09 Button2
GPIO10 None
GPIO12 Relay1
GPIO13 Led1i
GPIO14 None
GPIO15 None
GPIO16 None
Configuration (old format, will be converted to new template when applied)
{"NAME":"minitiger 2 Gang","GPIO":[17,255,255,255,0,22,18,0,21,56,0,0,0],"FLAG":0,"BASE":28}

This is a cheap Sonoff T1 clone. Available with 1/2/3 channels.


Needs to be flashed via serial. Short GPIO0 to GND to put it in programming mode. If you have successfully put the device into programming mode the LED does not light up.

Front and soldering: Fullsize

Front and soldering

Front and identification number: Front and identification number

Back and GND: Fullsize

Back and GND

Soldering layout: Fullsize

Soldering layout