Minoston MP22W Outdoor Plug (MP22W)
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led1i |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1n |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Minoston MP22W","GPIO":[0,0,0,0,56,0,0,0,21,90,0,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-26).
Tuya-Convert might not be possible for this device since the template was added (2020-02-26).
Note: This device may have switched to the ARM based W2BS module which does not support tasmota.
Purchased one from Amazon USA on 2020-12-22 and was not able to use tuya-convert. Has Bluetooth which is tip-off that it is no longer an ESP8266 inside.