Mirabella Genio Rechargable LED Portable Lamp Light (I002940)
Available from:
Kmart.com.au
Manufacturer:
Mirabellagenio.net.au
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | None |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"MirabellaPortableLamp","GPIO":[17,0,0,0,37,40,0,0,38,0,39,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-11-07).
Tuya-Convert might not be possible for this device since the template was added (2020-11-07).
MODE button maps to GPIO00/Button1 which in Tasmota will turn the light on and off.
ON/OFF button turns the whole device off to recharge the battery faster but this will disable the Wifi/Tasmota functionality. It does appear to still charge when turned on fully.