Moes WT02S Switch (2ANIF-WT02S)
Available from:
Aliexpress.com
Amazon.com
Amazon.ca
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led1i |
| GPIO05 | LedLinki |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Switch1 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Moes WT02S","GPIO":[0,0,0,0,56,158,0,0,21,9,0,0,0],"FLAG":15,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-17).
Tuya-Convert might not be possible for this device since the template was added (2020-02-17).
Use code BLAKADDER when buying from moeshouse.com store for a 20% discount.
Almost identical to the Moes SS01S-1 Switch
However, there are two individual LEDs, separately addressable. This template uses the white one to display the relay state and the red led to indicate Wi-fi or MQTT issues, if any.
