Moes 10A Switch Module (MS-101)
Moes 10A

Available from:


Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 Led_i 1
GPIO09 None
GPIO10 None
GPIO12 Relay 1
GPIO13 Button 1
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"Moes MS-101","GPIO":[0,0,0,0,0,320,0,0,224,32,0,0,0,0],"FLAG":0,"BASE":18}
Use code BLAKADDER when buying from moeshouse.com store for a 20% discount.

Works for MOES MS-101 Smart Swich, purchased from Aliexpress in May 2022, came with esp 8285 chip, flashed with Tasmotizer the same as any chip. Thanks to the Russian page


step1: solder the wires according to image 1

step2: connect usb-to-ttl adapter to pc, make sure GPIO0 is bridged with GND.

Step 3: Open Tasmotizer select the com corresponding to the adapter, and select release tasmota.bin image (first in the list) then hit the Tasmotize! and wait for the flashing to finish.

Step 4: Once the process is finished, disconnect the adapter and reconnect by removing the jumper between GPIO0 and GND, now you can configure the already tasmoted device.” NOTES: “The description is a translation of google translator